Order Products : sales@su-jiao.com
EPO-TEK® H20E-8
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Epoxy Technology Inc. |
| Trademark: | EPO-TEK® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | phPvCG_EPO-TEK-H20E-8.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| EPO-TEK ® H20E-8 is a two component, silver-filled epoxy system designed specifically for chip bonding in microelectronic and optoelectronic applications. It is a higher viscosity and higher thixotropic version of EPO-TEK® H20E. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Ion Type | |||
| Cl- | 141 | ppm | |
| NH4+ | 265 | ppm | |
| Particle Size | < 45.0 | µm |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Degradation Temperature | 470 | °C | TGA |
| Die Shear Strength - >5 kg (23°C) | 11.7 | MPa | |
| Operating Temperature | |||
| Continuous | -55 to 250 | °C | |
| Intermittent | -55 to 350 | °C | |
| Storage Modulus (23°C) | 5.46 | GPa | |
| Thixotropic Index | 4.85 | ||
| Weight Loss on Heating | |||
| 200°C | 0.25 | % | |
| 250°C | 0.37 | % | |
| 300°C | 0.79 | % |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Glass Transition Temperature 1 | > 80.0 | °C | |
| CLTE - Flow | |||
| -- 2 | 2.6E-5 | cm/cm/°C | |
| -- 3 | 1.1E-4 | cm/cm/°C | |
| Thermal Conductivity | 3.5 | W/m/K |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Part A | Mix Ratio by Weight: 1.0 | ||
| Part B | Mix Ratio by Weight: 1.0 | ||
| Shelf Life (23°C) | 26 | wk |
| Uncured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Color | |||
| -- 4 | Silver | ||
| -- 5 | Silver | ||
| Density | |||
| Part A | 2.71 | g/cm³ | |
| Part B | 4.32 | g/cm³ | |
| Viscosity 6(23°C) | 10 to 20 | Pa·s | |
| Curing Time (150°C) | 1.0 | hr | |
| Pot Life | 4300 | min |
| Cured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 66 | ||
| Lap Shear Strength (23°C) | 8.38 | MPa | |
| Volume Resistivity (23°C) | < 4.0E-4 | ohms·cm |
| Note Message | |
|---|---|
| 1 . | Dynamic Cure 20-200°C/ISO 25 Min; Ramp -10-200°C @ 20°C/Min |
| 2 . | Below Tg |
| 3 . | Above Tg |
| 4 . | Part B |
| 5 . | Part A |
| 6 . | 20 rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Unilex™ UP 8002F | United Polychem | PP Homopolymer | Unilex™ |
| Capa鈩?6100 | Perstorp Holding AB | PCL | Canuck Compounds |
| Ebalta GM 708 / PUR 4 | Ebalta Kunststoff GmbH | PUR, Unspecified | Ebalta |
| MAJORIS FW307 - 8487 | AD majoris | PP, Unspecified | MAJORIS |
| Dynalloy™ GP 7820-40N | PolyOne Corporation | TPE | Dynalloy™ |
