Order Products : sales@su-jiao.com
Garathane™ X 94-350-B NATURAL
| Category: | PUR-Ether , Polyurethane (Polyether based) |
| Manufacturer: | AlphaGary |
| Trademark: | Garathane™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | pgOgQg_Garathane-X-94-350-B-NATURAL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| GARATHANE X 94-350-B IS A FLAME RETARDED POLYETHER BASED POLYURETHANE |
| General Information | |
|---|---|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.50 - 1.54 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw A | 86 - 92 | ASTM D2240 | |
| Shaw A, 15 seconds | 79 - 85 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain, 0.762 mm) | 4.83 | MPa | ASTM D412 |
| Tensile Strength (0.762 mm) | 12.4 | MPa | ASTM D412 |
| Tensile Elongation (Break, 0.762 mm) | 500 | % | ASTM D412 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength 1(23°C, 24 hr, in DTE 24 oil) | -5.0 | % | UL Unspecified |
| Change in Ultimate Elongation 2(23°C, 24 hr, in DTE 24 oil) | -10 | % | UL Unspecified |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -45.0 | °C | ASTM D746 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index (3.18 mm) | 35 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 132 | °C | |
| Cylinder Zone 2 Temp. | 138 | °C | |
| Cylinder Zone 3 Temp. | 143 | °C | |
| Cylinder Zone 4 Temp. | 149 | °C | |
| Cylinder Zone 5 Temp. | 149 | °C | |
| Adapter Temperature | 149 | °C | |
| Melt Temperature | 149 - 160 | °C | |
| Die Temperature | 149 | °C |
| Extrusion instructions |
|---|
| Note: Material may have to be hopper dried |
| Note Message | |
|---|---|
| 1 . | Thickness: 50 mil |
| 2 . | Thickness: 50 mil |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RABALON® SJ8300C | Mitsubishi Chemical Performance Polymers, Inc. | TPE | RABALON® |
| Purell ACP 5531 B | LyondellBasell Industries | HDPE | Purell |
| Sindustris PBT LW5304F | Sincerity Australia Pty Ltd. | PC+PBT | Sindustris PBT |
| SPESIN® KP212G15V0BL | Kolon Plastics, Inc. | PBT | SPESIN® |
| KRATON® G2874 GO-N | Kraton Polymers LLC | SEBS | KRATON® |
