Order Products : sales@su-jiao.com
Resform POM
| Category: | Acetal (POM) Copolymer , Acetal (POM) Copolymer |
| Manufacturer: | Polimarky Spolka Jawna |
| Trademark: | Resform |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | pcyguB_Resform-POM.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Resform POM is an Acetal (POM) Copolymer product. It is available in Europe. Primary characteristic: copolymer. |
| General Information | |
|---|---|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.43 to 1.45 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 6.0 to 13 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2200 to 2600 | MPa | ISO 527-2 |
| Tensile Stress | 54.0 to 60.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 20 to 50 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 5.0 to 8.0 | kJ/m² | ISO 179/1A |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 to 85.0 | °C | |
| Drying Time | 3.0 | hr | |
| Processing (Melt) Temp | 170 to 215 | °C | |
| Mold Temperature | 60.0 to 110 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTV-2 GI-380B | Silicones, Inc. | Silicone Rubber, RTV-2 | RTV-2 |
| Duratron® T4501 | Quadrant Engineering Plastic Products | PAI | Duratron® |
| Estane® 58133 TPU | Lubrizol Advanced Materials, Inc. | TPU-Polyester | Estane® |
| INEOS Wire & Cable BPD4035 | INEOS Olefins & Polymers Europe | MDPE | INEOS Wire & Cable |
| Panlite® GN-3610Z | TEIJIN LIMITED | PC | Panlite® |
