DOW™ Electrical & Telecommunications DFDA-1254 NT

Category:	LDPE , Low Density Polyethylene Insulation Compound
Manufacturer:	The Dow Chemical Company
Trademark:	DOW™ Electrical & Telecommunications
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	pbRVG6_DOW-Electrical-Telecommunications-DFDA-1254-NT.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
DFDA-1254 NT is a low density polyethylene insulating resin used to prepare applications that require a complete set of strict electrical properties. DFDA-1254 NT can be used as part of the resin for air injection processing to make foamed insulation materials for coaxial cables. Specifications DFDA-1254 NT meets the following specifications: ASTM D 1248 Type 1, Class A, Category 3

General Information
Uses	Coaxial Cable Insulation Wire and cable applications Communication wire insulation material Communication Equipment
Agency Ratings	ASTM D 1248, I, Class A, Cat. 3
Forms	Particle

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.918	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	8.0	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength	9.65	MPa	ASTM D638
Tensile Elongation (Break)	500	%	ASTM D638

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	> 1.0E+17	ohms·cm	ASTM D257
Dielectric Strength ¹(3.18 mm)	43	kV/mm	ASTM D149
Dissipation Factor			ASTM D1531
1 MHz	1.0E-4		ASTM D1531
2.47 GHz	3.0E-4		ASTM D1531
Dielectric Constant			ASTM D1531
1 MHz	2.29		ASTM D1531
2.47 GHz	2.27		ASTM D1531

Extrusion	Nominal Value	Unit
Melt Temperature	170 - 200	°C

Extrusion instructions
DFDA-1254 NT provides excellent surface finish and outstanding output rates over a broad range of conditions. For optimum results, use melt extrusion temperatures in the suggested range of 338 to 392°F (170-200°C). However, specific recommendations for processing conditions can be determined only when the application and type of processing equipment are known. Please contact your local Dow Chemical Wire and Cable Sales Representative for such particulars.

Extrusion instructions

DFDA-1254 NT provides excellent surface finish and outstanding output rates over a broad range of conditions. For optimum results, use melt extrusion temperatures in the suggested range of 338 to 392°F (170-200°C). However, specific recommendations for processing conditions can be determined only when the application and type of processing equipment are known. Please contact your local Dow Chemical Wire and Cable Sales Representative for such particulars.

Note Message
1 .	Method A (short time)

Resin Grade	Manufacturer	Category	Trademark
Ravamid® A BK 45	Ravago Group	Nylon 66	Ravamid®
Taitacell EPS 321Ss	Taita Chemical Company, Ltd.	PS (EPS)	Taitacell
FireCon™ CPE 30-20 RoHS Natural	PolyOne Corporation	CPE	FireCon™
Eltex® PF6212LA	INEOS Olefins & Polymers Europe	mLLDPE	Eltex®
LNP™ THERMOTUF™ DF004PSI compound	SABIC Innovative Plastics Asia Pacific	PC	LNP™ THERMOTUF™