Order Products : sales@su-jiao.com
Chemical Resources HD2955
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Chemical Resources, Inc. |
| Trademark: | Chemical Resources |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | pYccy6_Chemical-Resources-HD2955.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| HD2955 is suitable for blow molding. It meets the requirements of the FDA regulation 21CFR 177.1520 |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.955 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 23.4 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 12 | % | ASTM D638 |
| Flexural Modulus | 1090 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 62.8 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sarlink® TPE ME-2375N-01 | Teknor Apex Company | TPE | Sarlink® TPE |
| TECHNYL® A 31T1 MZ40 GREY 174 N | Solvay Engineering Plastics | Nylon 66 | TECHNYL® A |
| Uniflon UNILUB 5 | UNIFLON | PTFE | Uniflon |
| AMTOPP PM25 | Inteplast Group | PP, Unspecified | AMTOPP |
| Elastron庐 G P.G101.A45.B | Elastron USA, Inc. | SEBS | Elastron® G |
