Order Products : sales@su-jiao.com
Westlake LDPE EC477AA
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Westlake Chemical Corporation |
| Trademark: | Westlake LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | pYKumE_Westlake-LDPE-EC477AA.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| WESTLAKE polyethylene EC477 is a low-density resin designed for applications where high coating speeds and good drawdown are required. This material demonstrates good arhesive to paper, provides a good moisture barrier, and is heat-sealable at low temperatures. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.917 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | 16 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 8.96 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 450 | % | ASTM D638 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 302 to 329 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® P2650 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| Staramide ACF4 | Eurostar Engineering Plastics | Nylon 66 | Staramide |
| Niuk 60GP10 | Shanghai Niuk New Plastic Technology Co., Ltd. | PBT | Niuk |
| 4DUR® 9K23100 HI | 4Plas | PBT | 4DUR® |
| ALCOM® PA6 900/1 GF30 TF15 SI2 IM | ALBIS PLASTIC GmbH | Nylon 6 | ALCOM® PA6 |
