Order Products : sales@su-jiao.com
Tuftec™ H1141
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | AKelastomers |
| Trademark: | Tuftec™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | pW894N_Tuftec-H1141.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Di-/tri-block polymer structure obtained by advanced coupling technology; di-block providing good flowability, and tri-block providing a superior balance of performance characteristics. It is supplied in pellet form. Olefinic resins modifier, for high impact strength. Compatibilizer. Adhesives and sealants component. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.910 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | 22 | g/10 min | |
| 230°C/2.16 kg | 140 | g/10 min |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 84 | JIS K6253 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus - 300% Secant | 2.80 | MPa | JIS K6251 |
| Tensile Strength (Yield) | 2.70 | MPa | JIS K6251 |
| Tensile Elongation (Break) | 520 | % | JIS K6251 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Stress (120°C, 168 hr) | 0.0 | % | ISO 188 |
| Change in Tensile Strain at Break (120°C, 168 hr) | -3.0 | % | ISO 188 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Dryflex® 420451S | ELASTO | SBS | Dryflex® |
| KOCETAL® GF304BK | Kolon Plastics, Inc. | Acetal (POM) Copolymer | KOCETAL® |
| Braskem PP DH789.01 | Braskem Europe GmbH | PP Homopolymer | Braskem PP |
| Adflex 7636 XCP | LyondellBasell Industries | Polyolefin, Unspecified | Adflex |
| Silastic® 7-4870 | Dow Corning Corporation | Silicone | Silastic® |
