Order Products : sales@su-jiao.com
ARMAMID® PA HC 10
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Poly Plastic |
| Trademark: | ARMAMID® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | pTtRw1_ARMAMID-PA-HC-10.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ARMAMID® PA HC 10 is a Polyamide 6 (Nylon 6) product. It is available in Europe. |
| General Information |
|---|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Density | 1.17 | g/cm³ | |
| Molding Shrinkage | 0.70 to 0.90 | % |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Stress (Yield) | 105 | MPa | |
| Flexural Modulus (23°C) | 5300 | MPa | |
| Flexural Stress | 150 | MPa |
| Impact | Nominal Value | Unit | |
|---|---|---|---|
| Charpy Unnotched Impact Strength (20°C) | 35 | kJ/m² |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Melting Temperature | 216 | °C | |
| Heat Stability - of wick | 200 | °C |
| Electrical | Nominal Value | Unit | |
|---|---|---|---|
| Surface Resistivity 1 | 1.1E+2 | ohms | |
| Volume Resistivity 2 | 1.1E+4 | ohms·cm |
| Note Message | |
|---|---|
| 1 . | Dry |
| 2 . | Dry |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TAROMID A 280 G5 | Taro Plast S.p.A. | Nylon 66 | TAROMID A |
| Celstran® PP-GF50-0403 P10 | Celanese Corporation | PP, Unspecified | Celstran® |
| DJSilicone NE-7150 | DONGJUE SILICONE (NANJING) CO., LTD | Silicone | DJSilicone |
| Magnobond 108-059 | Magnolia Plastics, Inc. | Epoxy | Magnobond |
| ESTOPLAST EP 2730BB01 | Ester Industries Ltd. | PBT | ESTOPLAST EP |
