Order Products : sales@su-jiao.com
AZDEL™ C507-B01
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Azdel, Inc. |
| Trademark: | AZDEL™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | pTnKHZ_AZDEL-C507-B01.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| AZDEL C507-B01 is a glass mat thermoplastic laminate based upon random oriented chopped fiber mat and mineral filler contained within polypropylene resin matrix. This composite material features high flow properties and a very homogeneous fiber distribution and exhibits low part warpage after molding. This material is typically used for standard semi-structural thin wall applications and where good glass distribution into features such as ribs and bosses is desired. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.29 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.10 - 0.30 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 9200 | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 144 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 2.4 | % | ISO 527-2 |
| Flexural Modulus | 6700 | MPa | ISO 178 |
| Flexural Stress | 168 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 35 | kJ/m² | ISO 180 |
| Instrumented Dart Impact | ASTM D3763 | ||
| 4.00 mm, Energy at Peak Load | 16.9 | J | ASTM D3763 |
| 4.00 mm, Total Energy | 31.0 | J | ASTM D3763 |
| Additional Information |
|---|
| Basis Weight, Internal Test Method: 1.12 lbs/ft²Filler Content by Weight(ashing), Internal Test Method: 50 %Multi-axial Impact Peak Force, ASTM D3763, 4mm: 945 lbsNotched Izod Impact, ISO 180, 23°C, 4mm: 35.3 kJ/m² J/mPoissons Ratio, ISO 527: 0.234Sheet Thickness, Internal Test Method: 165 milsSpecific Gravity, ASTM D792, Laminated: 1.29Specific Gravity, ASTM D792, Molded: 1.31 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tecomid® NA43 GR25 NL XA43 | Eurotec Engineering Plastics | Nylon 66 | Tecomid® |
| Texalan® 2 Series 265A | Austin Novel Materials Co. Ltd. | TPU-Polyester | Texalan® 2 Series |
| Arnitel® PM460 | DSM Engineering Plastics | TPC-ET | Arnitel® |
| Braskem PE HD9601C | Braskem | HDPE | Braskem PE |
| Sylvin 8482-75 Red 6293 | Sylvin Technologies Incorporated | PVC+NBR | Sylvin |
