Order Products : sales@su-jiao.com
Kumho KTR KTR-401
| Category: | SBS , Styrene Butadiene Styrene Block Copolymer |
| Manufacturer: | Korea Kumho Petrochemical Co., Ltd. |
| Trademark: | Kumho KTR |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | pRqtPM_Kumho-KTR-KTR-401.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
KUMHO KTR ® 401 polymer is a radial block copolymer based on styrene and butadiene with bound styrene of 31.0% mass. It is supplied in two physical forms, identified as follows in the grade nomenclature:
|
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 0.938 | g/cm³ | |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | < 1.0 | g/10 min | |
| Ash Content | 0.1 | wt% | |
| Oil Content | 0.0 | wt% | |
| Solution Viscosity 1(25°C) | 24 | mPa·s | |
| Styrene Content | 31.0 | wt% | |
| Volatile Matter | 0.50 | wt% |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec) | 82 |
| Elastomers | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Stress (300% Strain) | 3.04 | MPa | |
| Tensile Strength (Break) | 24.5 | MPa | |
| Tensile Elongation (Break) | 700 | % |
| Note Message | |
|---|---|
| 1 . | 5.23 wt% in toluene |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| WEVO-CHEMIE Polyurethanes PU 590 FL/300 M | WEVO-CHEMIE GmbH | PUR, Unspecified | WEVO-CHEMIE Polyurethanes |
| Mylar® S (35 guage) | DuPont Teijin Films U.S. | PET | Mylar® |
| Arnite® B437 SE/R | DSM Engineering Plastics | PBT | Arnite® |
| DAI-EL™ LT-271 | DAIKIN AMERICA, INC. | Fluorelastomer | DAI-EL™ |
| Kepamid® 1825GF | Korea Engineering Plastics Co., Ltd | Nylon 6 | Kepamid® |
