Order Products : sales@su-jiao.com
Innothane® IE-10AH
| Category: | TSU-Ether , Polyurethane Thermoset Elastomer, Polyether Based |
| Manufacturer: | Innovative Polymers, Inc. |
| Trademark: | Innothane® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | pQHOI7_Innothane-IE-10AH.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| IE-1OAH is a soft, flexible polyurethane/polyether based elastomer formulated for hand-batch processing. Excellent physical properties can be obtained with a room temperature cure without the utilization of mercury, MOCA, or TDI. |
| General Information | |
|---|---|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| Base Resin | 1.05 | g/cm³ | |
| Cured | 1.06 | g/cm³ | |
| Hardener | 1.07 | g/cm³ | |
| Molding Shrinkage - Flow | 0.10 to 0.30 | % | ASTM D2566 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Volume: 98 Mix Ratio by Weight: 100 | ||
| Resin | Mix Ratio by Weight: 100 Mix Ratio by Volume: 100 | ||
| Demold Time | 180 to 300 | min |
| Uncured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Viscosity | |||
| 25°C 1 | 0.20 | Pa·s | |
| 25°C 2 | 0.60 | Pa·s | |
| 25°C 3 | 1.5 | Pa·s | |
| Curing Time (25°C) | 1.7E+2 | hr | |
| Gel Time | 10 to 14 | min |
| Cured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 5 to 15 | ASTM D2240 | |
| Tensile Strength | 1.03 | MPa | ASTM D638 |
| Tensile Elongation at Break | 450 | % | ASTM D638 |
| Tear Strength | 4.38 | kN/m | ASTM D624 |
| Note Message | |
|---|---|
| 1 . | Resin |
| 2 . | Mixed |
| 3 . | Hardener |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PrimoFlo 60A-300 | KMI Group Inc. | SEBS | PrimoFlo |
| SILVER® ABS 250B | Guangdong Silver Age Sci & Tech. Co., Ltd | ABS+PVC | SILVER® |
| Daelim Po1y® LL-25 | DAELIM INDUSTRIAL CO., LTD. | LLDPE | Daelim Po1y® |
| OTECH PVC OW633-UL Approved | OTECH Corporation | PVC, Unspecified | OTECH PVC |
| Sylvin 9077-80 Yellow 4161 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
