Order Products : sales@su-jiao.com
Sylvin 8240-80FU White 1513
| Category: | PVC, Unspecified , Polyvinyl Chloride |
| Manufacturer: | Sylvin Technologies Incorporated |
| Trademark: | Sylvin |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | pPbHV2_Sylvin824080FUWhite1513.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Sylvin 8240-80FU White 1513 Is A Vinyl Compound Formulated For Outdoor Extrusion Applications. This Compound Contains An Antimicrobial. |
| General Information | |
|---|---|
| Additive |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.40 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw A | 80 | ASTM D2240 | |
| Shaw A, 10 seconds | 80 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 14.5 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 350 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | 61.3 | kN/m | ASTM D624 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Melting Temperature | 166 - 177 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Dryflex® WS 25E950 | ELASTO | TPE | Dryflex® |
| Edgetek™ XT XT-500-CU00 | PolyOne Corporation | PC+PBT | Edgetek™ XT |
| HiFill® PA6/6 GB10 L | Techmer Engineered Solutions | Nylon 66 | HiFill® |
| HiFill® HDPE TM5 | Techmer Engineered Solutions | HDPE | HiFill® |
| OPNYL OP66UT105 | Ovation Polymers Inc. | Nylon 66 | OPNYL |
