Order Products : sales@su-jiao.com

CABELEC® CC6135

Category:	PS (GPPS) , General Purpose Polystyrene
Manufacturer:	Cabot Corporation
Trademark:	CABELEC®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	pOumFd_CABELECCC6135.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
CABELEC CC6135 conductive concentrate is an electrically conductive concentrate made from conductive carbon black dispersed in a modified styrenic resin. Its electrical and mechanical properties are not dependent on atmospheric conditions. However, these properties can vary depending on the type and level of dilution resin used and the processing conditions. Unlike standard conductive compounds, which have very limited dilution potential, CABELEC CC6135 conductive concentrate can be diluted with a high quantity of natural resin (see graph below). This allows users of CABELEC CC6135 conductive concentrate to benefit from the versatility of this concentrate and from enhanced physical properties due to higher levels of dilution resin. Applications CABELEC CC6135 conductive concentrate (after dilution) can reduce the hazards of electrostatic discharge in applications such as packaging and handling of electronic components, explosive powders and pigments.

Message

CABELEC CC6135 conductive concentrate is an electrically conductive concentrate made from conductive carbon black dispersed in a modified styrenic resin. Its electrical and mechanical properties are not dependent on atmospheric conditions. However, these properties can vary depending on the type and level of dilution resin used and the processing conditions.

Unlike standard conductive compounds, which have very limited dilution potential, CABELEC CC6135 conductive concentrate can be diluted with a high quantity of natural resin (see graph below). This allows users of CABELEC CC6135 conductive concentrate to benefit from the versatility of this concentrate and from enhanced physical properties due to higher levels of dilution resin.

Applications
CABELEC CC6135 conductive concentrate (after dilution) can reduce the hazards of electrostatic discharge in applications such as packaging and handling of electronic components, explosive powders and pigments.

General Information
Additive	Carbon black
Features	Conductivity
Uses	Packaging
Agency Ratings	EC 1907/2006 (REACH)
Forms	Particle
Processing Method	Extrusion

Physical	Nominal Value	Unit	Test Method
Density (23°C)	1.20	g/cm³	Internal method
Melt Mass-Flow Rate (MFR) (230°C/21.6 kg)	4.0	g/10 min	ISO 1133

Films	Nominal Value	Unit	Test Method
Tensile Stress - MD (Break)	24.0	MPa	ISO 527-3
Tensile Elongation - MD (Break)	70	%	ISO 527-3
Elmendorf Tear Strength			ASTM D1922
MD	6.6	kN/m	ASTM D1922
TD	8.7	kN/m	ASTM D1922

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C)	11	kJ/m²	ISO 180

Electrical	Nominal Value	Unit	Test Method
Surface Resistivity	20	ohms	Internal method

Extrusion	Nominal Value	Unit
Drying Temperature	80	°C
Drying Time	2.0 - 4.0	hr
Cylinder Zone 1 Temp.	170 - 210	°C
Cylinder Zone 3 Temp.	170 - 210	°C
Cylinder Zone 5 Temp.	170 - 210	°C
Melt Temperature	< 230	°C

Resin Grade	Manufacturer	Category	Trademark
Celstran® PP-GF30-0405 P10/16	Celanese Corporation	PP, Unspecified	Celstran®
Epocast 1617 A/B	Huntsman Advanced Materials	Epoxy	Epocast
KumhoSunny PMMA/ABS HAM8580	Shanghai KumhoSunny Plastics Co., Ltd.	ABS+Acrylic	KumhoSunny PMMA/ABS
LNP™ LUBRICOMP™ QAP22S compound	SABIC Innovative Plastics	Nylon 610	LNP™ LUBRICOMP™
Pinnacle PP 5120H	Pinnacle Polymers	PP Random Copolymer	Pinnacle PP