Order Products : sales@su-jiao.com
Borealis PE MG9641B
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Borealis AG |
| Trademark: | Borealis PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | pMxUVV_Borealis-PE-MG9641B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| MG9641B is a natural high-density polyethylene with a narrow molecular weight distribution, which is produced in a low-pressure gas-phase process. This grade is designed for the injection moulding of articles which require good rigidity, good flow properties and high impact strength. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.964 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 8.0 | g/10 min | ISO 1133 |
| Molding Shrinkage | 1.0 - 2.0 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 63 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 1200 | MPa | ISO 527-2/1 |
| Tensile Stress (Yield, Injection Molded) | 27.0 | MPa | ISO 527-2/50 |
| Tensile Strain (Yield, Injection Molded) | 8.0 | % | ISO 527-2/50 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -20°C | 6.0 | kJ/m² | ISO 179/1eA |
| 23°C | 7.0 | kJ/m² | ISO 179/1eA |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature 1(0.45 MPa, Unannealed) | 77.0 | °C | ISO 75-2/B |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 210 - 275 | °C | |
| Mold Temperature | 10.0 - 40.0 | °C | |
| Injection Rate | Fast |
| Injection instructions |
|---|
| Holding pressure: As low as possible |
| Note Message | |
|---|---|
| 1 . | Injection molded specimen |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 203D TFE 10 Z | RTP Company | Nylon 612 | RTP |
| TPV Elastoprene® N80A-E | ELASTORSA Elastomeros Riojanos S.A. | PP+EPDM | TPV Elastoprene® |
| NYLOY® MG-0034N-V0 B14 | Nytex Composites Co., Ltd. | Nylon 66 | NYLOY® |
| LEXAN™ HPH4304 resin | SABIC Innovative Plastics | PC+PPC | LEXAN™ |
| LG PMMA HI533 | LG MMA Corp. | Acrylic (PMMA) | LG PMMA |
