Order Products : sales@su-jiao.com
Neoplast™ 250 M/E
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | Zylog Plastalloys Pvt. Ltd. |
| Trademark: | Neoplast™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | pLW0Pm_Neoplast250ME.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Neoplast 250 M/E is a soft, dynamically vulcanized thermoplastic vulcanizate (TPV), based on polyolefin chemistry and is intended for Injection Moulding and Extrusion applications. Key features Excellent Ozone resistance, Good Flex fatigue, RoHS Compliant, UV Stabilized |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity 1 | 0.950 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 5 sec, 23°C) | 50 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 2(100% Strain) | 13.9 | MPa | ASTM D412 |
| Tensile Strength 3(Break) | 14.7 | MPa | ASTM D412 |
| Tensile Elongation 4(Break) | 550 | % | ASTM D412 |
| Tear Strength 5 | 73.5 | kN/m | ASTM D624 |
| Compression Set (70°C, 22 hr) | 70 | % | ASTM D395B |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (150°C, 168 hr) | 10 | % | ASTM D573 |
| Change in Ultimate Elongation in Air (150°C, 168 hr) | -20 | % | ASTM D573 |
| Change in Durometer Hardness in Air (150°C, 168 hr) | 1.0 | ASTM D573 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Continuous Use Temperature | 135 | °C | SAE J2236 |
| Brittleness Temperature | -30.0 | °C | ASTM D746 |
| Note Message | |
|---|---|
| 1 . | 23°C |
| 2 . | C mold, 500 mm/min |
| 3 . | C mold, 500 mm/min |
| 4 . | C mold, 500 mm/min |
| 5 . | C mold, 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sarlink® TPE ME-1345N | Teknor Apex Company | TPE | Sarlink® TPE |
| Urochem 171 | Chemiplastica, Inc. | Urea Formald | Urochem |
| AVALON® 85 AB | Huntsman Corporation | TPU-Polyester | AVALON® |
| Hyundai EP Breathable AT880H/2102 | HYUNDAI EP Co., Ltd. | Polyolefin, Unspecified | Hyundai EP Breathable |
| Durez® 37042 | SBHPP | Phenolic | Durez® |
