Order Products : sales@su-jiao.com
SEQUEL® 2384 NAT
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | SEQUEL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | pKGuSs_SEQUEL2384NAT.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Sequel 2384 NAT thermoplastic polyolefin material is typically used for large molded-in-color automotive interior applications that require stiffness and dimensional stability over a broad temperature range. This material is specifically used in laser-scorable air-bag or instrument-panel applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Density (23°C) | 1.01 | g/cm³ | |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 17 | g/10 min |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength 1(Yield, 23°C) | 20.0 | MPa | |
| Flexural Modulus 2(23°C) | 1630 | MPa |
| Impact | Nominal Value | Unit | |
|---|---|---|---|
| Multi-Axial Instrumented Impact Energy 3(23°C, 3.20 mm) | 20.0 | J |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 2.0 mm/min |
| 3 . | 2.2 m/sec |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® PP FPC100 | Saudi Basic Industries Corporation (SABIC) | PP Impact Copolymer | SABIC® PP |
| Sindustris PC GN2102F | Sincerity Australia Pty Ltd. | PC | Sindustris PC |
| Huafon HF-3095A | Huafon Group Co., Ltd. | TPU-Polyester | Huafon |
| ICORENE® N6504 | ICO Polymers EMEA, A Division of A. Schulman | PS (HIPS) | ICORENE® |
| Iupilon® MB2213R | Mitsubishi Engineering-Plastics Corp | PC+ABS | Iupilon® |
