Order Products : sales@su-jiao.com
MAJORIS GFRH210 - 8229
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | AD majoris |
| Trademark: | MAJORIS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | pK7zk7_MAJORIS-GFRH210---8229.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
MAJORIS GFRH210 - 8229 is a special long glass fibre reinforced polypropylene compound halogen flame retardant UL 94 V2 classification, for injection moulding and extrusion. The long glass fibres, chemically coupled to the polypropylene matrix, are providing with outstanding mechanical properties. MAJORIS GFRH210 - 8229 is available both in black (MAJORIS GFRH210 - 8229) and natural (MAJORIS GFRH210). Other colours can be provided on request. APPLICATIONS MAJORIS GFRH210 - 8229 is intended for injection moulding of highly demanding technical applications. The excellent properties of MAJORIS GFRH210 - 8229 make it suitable for:
MAJORIS GFRH210 - 8229 can, in many of these applications, substitute other engineering plastics or metal alloys. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.18 | g/cm³ | ISO 1183 |
| Molding Shrinkage | 0.74 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 5300 | MPa | ISO 527-2/1 |
| Tensile Stress (Break) | 83.0 | MPa | ISO 527-2/50 |
| Tensile Strain (Break) | 2.5 | % | ISO 527-2/50 |
| Flexural Modulus | 4800 | MPa | ISO 178 |
| Flexural Stress | 128 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 12 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength (23°C) | 43 | kJ/m² | ISO 179/1eU |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, not annealed | 159 | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 144 | °C | ISO 75-2/A |
| Ball Pressure Test (125°C) | Pass | IEC 60335-1 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.60 mm) | V-2 | UL 94 | |
| Glow Wire Flammability Index | IEC 60695-2-12 | ||
| 1.00 mm | 750 | °C | IEC 60695-2-12 |
| 2.00 mm | 750 | °C | IEC 60695-2-12 |
| Glow Wire Ignition Temperature | IEC 60695-2-13 | ||
| 1.00 mm | 775 | °C | IEC 60695-2-13 |
| 2.00 mm | 775 | °C | IEC 60695-2-13 |
| Horizontal Combustibility 1 | C2B |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Injection Velocity | 20 - 30 | mm/sec | |
| Rear Temperature | 230 - 250 | °C | |
| Processing (Melt) Temp | 250 - 270 | °C | |
| Mold Temperature | 80.0 - 100 | °C | |
| Injection Pressure | 30.0 - 60.0 | MPa | |
| Injection Rate | Slow | ||
| Screw Speed | 30 - 150 | rpm |
| Injection instructions |
|---|
| Holding pressure: 50 to 70% of the injection pressurelBack pressure: as low as possible, 0 to 10% |
| Note Message | |
|---|---|
| 1 . | Method: D 45 1333 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYshine PBT D221 Q25 | Polykemi AB | PBT | POLYshine |
| Radilon® A RV250KB 856 BRU | Radici Plastics | Nylon 66 | Radilon® |
| Sylvin 2944-91 Clear 8413 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| HOPELEX PCH-2006 | Lotte Chemical Corporation | PC | HOPELEX |
| LITEN BB 85 | UNIPETROL RPA | PE Copolymer | LITEN |
