Order Products : sales@su-jiao.com

ULTRATUF™ 22

Category:	TPO , Compounded Polypropylene
Manufacturer:	Spartech Plastics
Trademark:	ULTRATUF™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	pHQuFx_ULTRATUF-22.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
ULTRATUF™ 22 is a composite sheet utilizing short-strand fiber glass for reinforcement, which adds a high level of stiffness to a polyolefin base resin. ULTRATUF™ 22 is a replacement for traditional chopped-strand or closed mold fiberglass parts and can be easily thermoformed. The fiber glass component increases flexural modulus (part stiffness) and heat deflection temperature, making this alloy suited for under-the-hood applications. Other key features of ULTRATUF™ 22 include very low CLTE and good impact strength. Features and Benefits High level of stiffness Low coefficient of thermal expansion High heat deflection temperature Good impact strength Excellent chemical resistance Fortified for large part thermoforming Target Markets & Applications ULTRATUF™ 22 is a great choice for a wide range of applications and market segments Agricultural - for cooling fan shrouds, engine filter covers, feeder bins, partitions Construction Equipment - for interior dash assemblies, engine covers, water shields, floor applications Medium & Heavy Truck - for engine fan shrouds, interior instrument panel supports, HVAC covers Power Sports - for ATV & snow skid plates, golf cart floor panels and rear body cargo holds Automotive - for instrument panel supports, under the hood covers, dunnage trays Processing ULTRATUF™ 22 glass filled TPO sheet can be thermoformed in standard thermoforming ovens, although zoned ceramic or quartz heaters are recommended. Forming over aluminum cooled tooling results in the best part aesthetics. Molds made from fiberglass or epoxy can be used for tooling prototyping or small part runs. Care must be taken in forming to heat sheet evenly and not overheat. Stock temperatures of approximately 340° F - 360° F are recommended targets, but each process should be adjusted to allow proper forming. As with any thermoplastic material, coefficient of thermal expansion and mold shrinkage should be considered for proper part fit and tooling design. ULTRATUF™ 22 is developed for fiberglass replacement applications requiring lower CTE and increased HDT. Availability ULTRATUF™ 22 is offered in black color with UV packages available. ULTRATUF™ 22 is a custom extruded sheet product. 1. Sheets Size maximum width is 72-inch 2. Gauges 0.125 - 0.300-inch 3. Minimum Order 10,000 lbs. Available Textures -Smooth Only

Message

ULTRATUF™ 22 is a composite sheet utilizing short-strand fiber glass for reinforcement, which adds a high level of stiffness to a polyolefin base resin. ULTRATUF™ 22 is a replacement for traditional chopped-strand or closed mold fiberglass parts and can be easily thermoformed. The fiber glass component increases flexural modulus (part stiffness) and heat deflection temperature, making this alloy suited for under-the-hood applications. Other key features of ULTRATUF™ 22 include very low CLTE and good impact strength.

Features and Benefits

High level of stiffness

Low coefficient of thermal expansion

High heat deflection temperature

Good impact strength

Excellent chemical resistance

Fortified for large part thermoforming

Target Markets & Applications
ULTRATUF™ 22 is a great choice for a wide range of applications and market segments

Agricultural - for cooling fan shrouds, engine filter covers, feeder bins, partitions

Construction Equipment - for interior dash assemblies, engine covers, water shields, floor applications

Medium & Heavy Truck - for engine fan shrouds, interior instrument panel supports, HVAC covers

Power Sports - for ATV & snow skid plates, golf cart floor panels and rear body cargo holds

Automotive - for instrument panel supports, under the hood covers, dunnage trays

Processing
ULTRATUF™ 22 glass filled TPO sheet can be thermoformed in standard thermoforming ovens, although zoned ceramic or quartz heaters are recommended. Forming over aluminum cooled tooling results in the best part aesthetics. Molds made from fiberglass or epoxy can be used for tooling prototyping or small part runs. Care must be taken in forming to heat sheet evenly and not overheat. Stock temperatures of approximately 340° F - 360° F are recommended targets, but each process should be adjusted to allow proper forming. As with any thermoplastic material, coefficient of thermal expansion and mold shrinkage should be considered for proper part fit and tooling design.

ULTRATUF™ 22 is developed for fiberglass replacement applications requiring lower CTE and increased HDT.

Availability
ULTRATUF™ 22 is offered in black color with UV packages available.
ULTRATUF™ 22 is a custom extruded sheet product.
1. Sheets Size maximum width is 72-inch
2. Gauges 0.125 - 0.300-inch
3. Minimum Order 10,000 lbs.
Available Textures -Smooth Only

General Information
Filler / Reinforcement	Glass fiber reinforced material
Features	Rigidity, high Impact resistance, good Good chemical resistance Heat resistance, high
Uses	Agricultural application Parts under the hood of a car Application in Automobile Field Car dashboard Sporting goods
Appearance	Black
Forms	Sheet
Processing Method	Thermoforming

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.03	g/cm³	ASTM D792
Molding Shrinkage - Flow (3.18 mm)	0.30 - 0.60	%	ASTM D955

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield, 23°C)	58.6	MPa	ASTM D638
Flexural Modulus			ASTM D790
Secant : 23°C	3530	MPa	ASTM D790
Tangent : 23°C	4830	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact			ASTM D256
-29°C	110	J/m	ASTM D256
23°C	280	J/m	ASTM D256
Multi-Axial Instrumented Impact Energy (-20°C, Total Penetration Energy)	50.2	J	ASTM D3763
Multi-Axial Instrumented Impact Peak Force (-20°C)	4190	N	ASTM D3763

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load			ASTM D648
0.45 MPa, not annealed	149	°C	ASTM D648
1.8 MPa, not annealed	113	°C	ASTM D648

Resin Grade	Manufacturer	Category	Trademark
Sylvin 2945-70 Clear 8382	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
VAMPSTAT Y 35GC 04 V0 30	Vamp Tech	Nylon 66	VAMPSTAT
Epoxies, Ect. 20-3302NCLV	Epoxies, Etc.	Epoxy	Epoxies, Ect.
LUVOCOM® 1106-VAP-10	Lehmann & Voss & Co.	PEI	LUVOCOM®
LNP™ THERMOCOMP™ RF009H compound	SABIC Innovative Plastics	Nylon 66	LNP™ THERMOCOMP™