Order Products : sales@su-jiao.com
SABIC® PPcompound 7251U
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Saudi Basic Industries Corporation (SABIC) |
| Trademark: | SABIC® PPcompound |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | pG4gnF_SABICPPcompound7251U.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
SABIC® PPcompound 7251U is a development grade, elastomer-modified mineral filled Polypropylene for automotive exterior applications. This material has been designed to combine a good performance profile with good processing. The grade is UV stabilized and suited for unpainted exterior applications. SABIC® PPcompound 7251U is a designated automotive grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.00 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 14 | g/10 min | ISO 1133 |
| Molding Shrinkage (24 hr) | 0.90 | % | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2/5/50 | ||
| Yield, 3.20mm, injection molding | 15.0 | MPa | ISO 527-2/5/50 |
| Fracture, 3.20mm, injection molding | 11.0 | MPa | ISO 527-2/5/50 |
| Tensile Strain (Break, 3.20 mm, Injection Molded) | > 50 | % | ISO 527-2/5/50 |
| Flexural Modulus 1(Injection Molded) | 1200 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ISO 180/4A | ||
| -20°C, injection molding | 10 | kJ/m² | ISO 180/4A |
| 0°C, injection molding | 20 | kJ/m² | ISO 180/4A |
| 23°C, injection molding | No Break | ISO 180/4A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| CLTE - Flow | ASTM D696 | ||
| -30 to 30°C | 6.0E-5 | cm/cm/°C | ASTM D696 |
| 23 to 80°C | 1.0E-4 | cm/cm/°C | ASTM D696 |
| Note Message | |
|---|---|
| 1 . | Method I (three-point load) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Unilex™ UP.350.939UG | United Polychem | PE, Unspecified | Unilex™ |
| 4LEX® 9F22110 FR1 | 4Plas | PC | 4LEX® |
| Alkathene® LD1217 | Qenos Pty Ltd | LLDPE | Alkathene® |
| Hiflex CA 7600 A | LyondellBasell Industries | TPO (POE) | Hiflex |
| RONFALIN® ABS 1363 | A. Schulman Europe | ABS | RONFALIN® |
