Order Products : sales@su-jiao.com
RTP 4202
| Category: | PI, TP , Thermoplastic Polyimide |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | pG2Txv_RTP-4202.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.45 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm, Injection Molded) | 1.1 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.14 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 126 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 7580 | MPa | ASTM D638 |
| Tensile Strength | 141 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 3.2 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 6890 | MPa | ASTM D790 |
| Flexural Strength (Injection Molded) | 234 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 80 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 690 | J/m | ASTM D4812 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, Injection Molded) | 282 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.50 mm) | V-0 | UL 94 |
| Additional Information |
|---|
| The value listed as Flammibility, UL 94, was tested in accordance with RTP Company methods. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 371 - 410 | °C | |
| Middle Temperature | 371 - 410 | °C | |
| Front Temperature | 371 - 410 | °C | |
| Mold Temperature | 177 - 232 | °C | |
| Injection Pressure | 138 - 193 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Moplen HP500L | Shazand (Arak) Petrochemical Corporation | PP Homopolymer | Moplen |
| Titalon® 4100GF | Titan Plastics Compounds Co., Ltd. | Nylon 46 | Titalon® |
| DJSilicone NE-9430 | DONGJUE SILICONE (NANJING) CO., LTD | Silicone | DJSilicone |
| LNP™ LUBRICOMP™ OCP36 compound | SABIC Innovative Plastics | PPS | LNP™ LUBRICOMP™ |
| POLYFLON™ M-15HS | DAIKIN AMERICA, INC. | PTFE | POLYFLON™ |
