Order Products : sales@su-jiao.com
DeWAL DW 222
| Category: | PTFE , Polytetrafluoroethylene |
| Manufacturer: | DeWAL Industries |
| Trademark: | DeWAL |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | pEmGQr_DeWAL-DW-222.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Skived from virgin PTFE that has been etched on both sides with "sodium ammonia". This surface treatment allows the PTFE to become bondable on two sides. D/W 222 film is used in applications where it is necessary to allow a bond to both sides of the PTFE film. The D/W 222 film is used in areas of polymer composite construction where it serves as an integral part of the composite and where bonding to both sides is necessary. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Thickness | 50.8 to 1270 | nm |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Core ID | 7.62 | cm | |
| Maximum Roll OD | 356 | mm | |
| Width | 6.35 to 1270 | mm |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength - MD (Yield) | 27.6 | MPa | ASTM D882 |
| Tensile Elongation - MD (Break) | 300 | % | ASTM D882 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Continuous Use Temperature | 260 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POYAD CR102 | Pooya Polymer Tehran | PP Homopolymer | POYAD |
| Armlen® PP HC 15 | Poly Plastic | PP, Unspecified | Armlen® |
| Di-Pak™ E-4666-3 | Hapco Inc. | TP, Unspecified | Di-Pak™ |
| Electrafil® PC/ABS 830 SS7 BK | Techmer Engineered Solutions | PC+ABS | Electrafil® |
| ESTOPLAST XU 150GY67 | Ester Industries Ltd. | Nylon 6 | ESTOPLAST XU |
