Order Products : sales@su-jiao.com
SMOKEGUARD™ III 1022 NATURAL
| Category: | PVC, Unspecified , Polyvinyl Chloride |
| Manufacturer: | AlphaGary |
| Trademark: | SMOKEGUARD™ III |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | pCfGCO_SMOKEGUARD-III-1022-NATURAL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| A LEAD FREE, HIGHLY FLAME RETARDED, 75°C RATED, LOW SMOKE JACKETING COMPOUND FOR PLENUM CABLE CONSTRUCTIONS REQUIRING COMPLIANCE TO U.L. SUBJECT 910 MODIFIED STEINER TUNNEL. TEST |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.60 - 1.64 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw D | 67 - 73 | ASTM D2240 | |
| Shaw D, 15 seconds | 55 - 61 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D412 | ||
| 0.381 mm | 17.2 | MPa | ASTM D412 |
| 1.91 mm | 15.2 | MPa | ASTM D412 |
| Tensile Elongation | ASTM D412 | ||
| Fracture, 1.91mm | 200 | % | ASTM D412 |
| Fracture, 0.381mm | 190 | % | ASTM D412 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -6.00 | °C | ASTM D746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Constant (23°C, 100 MHz) | 3.60 | ASTM D150 | |
| Dissipation Factor (23°C, 100 MHz) | 0.019 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index (3.18 mm) | 54 | % | ASTM D2863 |
| Smoke | 5.0 | % | ASTM D4100 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Extruder Screw Compression Ratio | 3.0:1.0 | ||
| Cylinder Zone 1 Temp. | 149 | °C | |
| Cylinder Zone 2 Temp. | 154 | °C | |
| Cylinder Zone 3 Temp. | 163 | °C | |
| Cylinder Zone 4 Temp. | 168 | °C | |
| Cylinder Zone 5 Temp. | 168 | °C | |
| Adapter Temperature | 154 | °C | |
| Melt Temperature | 179 - 185 | °C | |
| Die Temperature | 154 | °C |
| Extrusion instructions |
|---|
| Melt temperature is critical @ temperatures above 370 degrees F foaming may occur. It may be necessary to adjust barrel temp to attain the desired melt temperature. Material should be dried prior to use |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVAMID® 66 GF 35 FRG 5 | Plastcom | Nylon 66 | SLOVAMID® 66 |
| Dutral® PM 06 PLE | Versalis S.p.A. | EPDM | Dutral® |
| GAPEX® RPP20EU48HB BLACK | Ferro Corporation | PP, Unspecified | GAPEX® |
| ALCOM® PC 740/4 BL 1355-06LD | ALBIS PLASTIC GmbH | PC | ALCOM® PC |
| LNP™ THERMOCOMP™ CX05470 compound | SABIC Innovative Plastics | PS (HIPS) | LNP™ THERMOCOMP™ |
