Order Products : sales@su-jiao.com
Greene FKM 742
| Category: | Fluorelastomer , Fluoroelastomer |
| Manufacturer: | Greene, Tweed & Co. |
| Trademark: | Greene FKM |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | p93DKW_Greene-FKM-742.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Fluoroelastomer 742 performs well in aggressive chemicals and where ultrapure materials are not required. Recommended for conventional wet and dry system applications, Fluoroelastomer 742 has a good field performance history in both dynamic and static applications. The mid-range durometer of this material allows the seal to conform to a wide range of hardware features. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 1.82 | g/cm³ |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Durometer Hardness (Shore A) | 75 |
| Elastomers | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Stress | |||
| 50% Strain | 4.14 | MPa | |
| 100% Strain | 7.07 | MPa | |
| Tensile Strength (Break) | 14.1 | MPa | |
| Tensile Elongation (Break) | 180 | % | |
| Compression Set 1(204°C, 70 hr) | 20 | % |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Continuous Use Temperature | -30.0 to 200 | °C | |
| Service Temperature - Excursion | -30 to 250 | °C |
| Note Message | |
|---|---|
| 1 . | 25% Deflection |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Moplen EP542T | PolyMirae | PP Copolymer | Moplen |
| VESTAMID® L L2101F | Evonik Industries AG | Nylon 12 | VESTAMID® L |
| CompaMid® PA 6.6 GF 50 | DimeLika Plast GmbH | Nylon 66 | CompaMid® |
| Dryflex® A1 600301 | ELASTO | SEBS | Dryflex® |
| KOPA® KN333G15SIBL | Kolon Plastics, Inc. | Nylon 66 | KOPA® |
