Order Products : sales@su-jiao.com
Fenochem T 3800
| Category: | Phenolic , Phenolic |
| Manufacturer: | Chemiplastica, Inc. |
| Trademark: | Fenochem |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | p8SH2Z_Fenochem-T-3800.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Colour : black Reinforcement : mineral flour/wood flour Application areas : parts for electrical technology, mounting parts, technical pieces Mark : DIN 31/1549 |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.50 | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 2577 | ||
| -- 1 | 0.40 to 0.60 | % | |
| -- | 0.50 to 0.70 | % | |
| Water Absorption | < 100.0 | mg | ISO 62 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flammability | IEC 707 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Stress | > 60.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | > 1.5 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | > 4.0 | kJ/m² | ISO 179/1eU |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | > 140 | °C | ISO 75-2/A |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | > 1.0E+9 | ohms | IEC 60093 |
| Volume Resistivity | > 1.0E+10 | ohms·cm | IEC 60093 |
| Comparative Tracking Index | > 175 | V | IEC 60112 |
| Note Message | |
|---|---|
| 1 . | Post-shrink |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Neopor® P 5200 | BASF Corporation | PS (EPS) | Neopor® |
| DuraFlex 717 | Evermore Chemical Industry Co., Ltd. | TPU-Polyester | DuraFlex |
| EPO-TEK® 730 | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
| PENTAMID A GV30 H yellow 1018/1 | PENTAC Polymer GmbH | Nylon 66 | PENTAMID A |
| LEXAN™ FL930 resin | SABIC Innovative Plastics | PC | LEXAN™ |
