Order Products : sales@su-jiao.com
Elastocon® CLR35
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Elastocon TPE Technologies |
| Trademark: | Elastocon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | p8Bt2O_ElastoconCLR35.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Elastocon® CLR35 is a transparent thermoplastic elastomer that has been developed for applications that require resilience, high strength properties and a good surface finish. Elastocon® CLR35 is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® CLR35 is supplied as ready to use pellets in 40 lb. quantities. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.900 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 38 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 0.830 | MPa | ASTM D412 |
| Tensile Strength | 10.2 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 790 | % | ASTM D412 |
| Tear Strength | 25.9 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 177 - 182 | °C | |
| Middle Temperature | 193 - 199 | °C | |
| Front Temperature | 204 - 216 | °C | |
| Nozzle Temperature | 204 - 216 | °C | |
| Processing (Melt) Temp | 204 - 216 | °C | |
| Mold Temperature | 16 - 49 | °C | |
| Injection Rate | Slow | ||
| Back Pressure | 0.345 - 1.03 | MPa | |
| Screw Compression Ratio | 2.5:1.0 - 3.0:1.0 |
| Injection instructions |
|---|
| Elastocon® CLR35 thermoplastic elastomer compound does not require drying. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Hopper Temperature | 79 | °C | |
| Cylinder Zone 1 Temp. | 149 | °C | |
| Cylinder Zone 5 Temp. | 177 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POWERSIL® 732 CS A/B | Wacker Chemie AG | Silicone | POWERSIL® |
| Forprene® 6NB901D50 | SO.F.TER. SPA | TPV | Forprene® |
| Jampilen HP371P | Jam Polypropylene Company | PP Homopolymer | Jampilen |
| Petrothene® NA967000 | LyondellBasell Industries | LDPE | Petrothene® |
| Moplen EP549T | LyondellBasell Industries | PP Impact Copolymer | Moplen |
