Order Products : sales@su-jiao.com
Sarlink® TPV X10035B
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | Teknor Apex Company |
| Trademark: | Sarlink® TPV |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | p6ZYH9_Sarlink-TPV-X10035B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Sarlink 10000 Series are designed for low friction molding applications, requiring a low coefficient of friction against glass or painted steel. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.897 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A, 5 sec, Injection Molded) | 36 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Coefficient of Friction | 0.80 to 0.90 | ASTM D1894 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress - Across Flow (100% Strain) | 0.800 | MPa | ISO 37 |
| Tensile Strength - Across Flow (Break) | 2.70 | MPa | ISO 37 |
| Tensile Elongation - Across Flow (Break) | 400 | % | ISO 37 |
| Tear Strength 1 | 11 | kN/m | ISO 34-1 |
| Compression Set (70°C, 22 hr) | 18 | % | ISO 815 |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Apparent Viscosity (200°C, 206 sec^-1) | 141 | Pa·s | ISO 11443 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 180 to 205 | °C | |
| Middle Temperature | 180 to 205 | °C | |
| Front Temperature | 180 to 205 | °C | |
| Nozzle Temperature | 185 to 210 | °C | |
| Processing (Melt) Temp | 185 to 210 | °C | |
| Mold Temperature | 10.0 to 55.0 | °C | |
| Back Pressure | 0.100 to 1.00 | MPa | |
| Screw Speed | 100 to 200 | rpm |
| Note Message | |
|---|---|
| 1 . | Method Ba, Angle (Unnicked) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxxam™ 8400-7001 | PolyOne Corporation | PP, Unspecified | Maxxam™ |
| RTP 154 LF | RTP Company | PP, Unspecified | RTP |
| ExxonMobil™ LDPE LD 302.32 | ExxonMobil Chemical | LDPE | ExxonMobil™ LDPE |
| Durethan® BG 30 X FN01 000000 | LANXESS GmbH | Nylon 6 | Durethan® |
| EPAMOULD 255D12 | Epaflex Polyurethanes S.R.L. | TPU-Polyester | EPAMOULD |
