Order Products : sales@su-jiao.com
Ateva® 2825A
| Category: | EVA , Ethylene Vinyl Acetate Copolymer |
| Manufacturer: | Celanese EVA Performance Polymers |
| Trademark: | Ateva® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | p5dRMD_Ateva-2825A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| This resin is commonly used for hot melt coating and adhesive applications. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.947 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 43 | g/10 min | ASTM D1238 |
| Vinyl Acetate Content | 28.0 | wt% |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 75 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break) | 10.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 790 | % | ASTM D638 |
| Flexural Modulus - 1% Secant | 13.0 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Peak Melting Temperature | 70.0 | °C | ASTM D3418 |
| Ring and Ball Softening Point | 113 | °C | ASTM E28 |
| Note Message | |
|---|---|
| 1 . | Type IV, 50 mm/min |
| 2 . | Type IV, 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TUFNYL® SGF 30 RED | SRF Ltd. | Nylon 6 | TUFNYL® |
| HiFill® PA6/6 GF40 UV L BK | Techmer Engineered Solutions | Nylon 66 | HiFill® |
| ISPLEN® PB 300 A3M | REPSOL | PP Impact Copolymer | ISPLEN® |
| Petrothene® GA502119 | LyondellBasell Industries | LLDPE | Petrothene® |
| Sylvin 6419-66 Natural | Sylvin Technologies Incorporated | TPE | Sylvin |
