Order Products : sales@su-jiao.com
Comco PA 6 G high impact
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Comco-Plastic GmbH |
| Trademark: | Comco |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | p4oMPz_Comco-PA-6-G-high-impact.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Comco PA 6 G high impact is a Polyamide 6 (Nylon 6) material. It is available in Europe. Important attributes of Comco PA 6 G high impact are:
|
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.13 | -- | g/cm³ | ISO 1183 |
| Water Absorption | ||||
| Saturation, 23°C | 6.0 | -- | % | |
| Equilibrium, 23°C, 50% RH | 1.8 | -- | % | |
| Water Absorption | ISO 62 | |||
| after 24 h immersion in water : 23°C | 40.0 | -- | mg | |
| after 96 h immersion in water : 23°C | 79.0 | -- | mg |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Maximum Service Temperature | ||||
| in air continuosly | 105 | -- | °C | |
| in air for short periods | 170 | -- | °C | |
| Service Temperature - Minimum | -30 | -- | °C |
| Hardness | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Rockwell Hardness (M-Scale) | 88 | -- | ISO 2039-2 | |
| Shore Hardness (Shore D) | 80 | -- | ISO 868 | |
| Ball Indentation Hardness | 165 | -- | MPa | ISO 2039-1 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus (23°C) | 2600 | -- | MPa | ISO 527-2 |
| Tensile Stress (Yield, 23°C) | 68.0 | 45.0 | MPa | ISO 527-2 |
| Tensile Strain (Break, 23°C) | 25 | > 50 | % | ISO 527-2 |
| Compressive Stress (1% Strain) | 26.0 | -- | MPa | ISO 604 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | 3.5 | -- | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | No Break | -- | ISO 179/1eU | |
| Notched Izod Impact Strength | 3.5 | 7.0 | kJ/m² | ISO 180/2A |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 80.0 | -- | °C | ISO 75-2/A |
| Melting Temperature | 220 | -- | °C | |
| CLTE - Flow | ||||
| 23 to 60°C | 8.0E-5 | -- | cm/cm/°C | |
| 23 to 100°C | 9.0E-5 | -- | cm/cm/°C | |
| Thermal Conductivity | 0.25 | -- | W/m/K |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface Resistivity | > 1.0E+13 | > 1.0E+12 | ohms | IEC 60093 |
| Volume Resistivity | > 1.0E+14 | > 1.0E+12 | ohms·cm | IEC 60093 |
| Electric Strength | 25 | 17 | kV/mm | IEC 60243-1 |
| Relative Permittivity | IEC 60250 | |||
| 100 Hz | 3.60 | 6.60 | ||
| 1 MHz | 3.20 | 3.70 | ||
| Dissipation Factor | IEC 60250 | |||
| 100 Hz | 0.012 | 0.14 | ||
| 1 MHz | 0.016 | 0.050 | ||
| Comparative Tracking Index | 600 | 600 | V | IEC 60112 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating | UL 94 | |||
| 3.00 mm | HB | -- | ||
| 6.00 mm | HB | -- |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Dryflex® 605550 | ELASTO | TPE | Dryflex® |
| EMPILON® 765 | EMPILON | SEBS | EMPILON® |
| Osterlene® PPH-100-.3 | Osterman & Company | PP Homopolymer | Osterlene® |
| Techsil® RTV10533 | Techsil Limited | Silicone Rubber, RTV-1 | Techsil® |
| CERTENE™ SGS-015 | Muehlstein | PS (GPPS) | CERTENE™ |
