Order Products : sales@su-jiao.com
Telcar® GS4000
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Teknor Apex Asia Pacific PTE. LTD. |
| Trademark: | Telcar® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | p4Qi9L_Telcar-GS4000.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Telcar®GS4000 is a thermoplastic elastomer (TPE) material,. This product is available in the Asia-Pacific region and is processed by extrusion or injection molding. Typical application areas include:
|
| General Information | |
|---|---|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.880 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 80 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 45 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 1.50 | MPa | ASTM D412 |
| 300% strain | 2.00 | MPa | ASTM D412 |
| Tensile Strength (Break) | 3.00 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 350 | % | ASTM D412 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 40.0 - 80.0 | °C | |
| Rear Temperature | 180 - 250 | °C | |
| Middle Temperature | 180 - 250 | °C | |
| Front Temperature | 180 - 250 | °C | |
| Mold Temperature | 40.0 - 60.0 | °C | |
| Injection Pressure | 10.3 - 138 | MPa | |
| Injection Rate | Fast |
| Injection instructions |
|---|
| Purging Material: HDPE, PP |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 40.0 - 80.0 | °C | |
| Cylinder Zone 1 Temp. | 170 - 230 | °C | |
| Cylinder Zone 2 Temp. | 170 - 230 | °C | |
| Cylinder Zone 3 Temp. | 170 - 230 | °C | |
| Cylinder Zone 4 Temp. | 170 - 230 | °C | |
| Cylinder Zone 5 Temp. | 170 - 230 | °C |
| Extrusion instructions |
|---|
| Compression Ratio: 2.5 to 5.0Purging Material: HDPE, PPLD Ratio: 25:1 or higher |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RheTech Polypropylene CC40P100-00 | RheTech, Inc. | PP, Unspecified | RheTech Polypropylene |
| TAROMID A 280 H G6 X0 | Taro Plast S.p.A. | Nylon 66 | TAROMID A |
| 4PROP® 9C23300 | 4Plas | PP Copolymer | 4PROP® |
| ALCOM® PC 740/4 UV WT1401-06LD | ALBIS PLASTIC GmbH | PC | ALCOM® PC |
| DOMAMID® 66G35V0P 1001 | DOMO Engineering Plastics SPA | Nylon 66 | DOMAMID® |
