Order Products : sales@su-jiao.com
Delas 195
| Category: | PVC+NBR , Polyvinyl Chloride + NBR |
| Manufacturer: | Shanghai Lin Gen Rubber Materials Co., Ltd. |
| Trademark: | Delas |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | p4GueM_Delas195.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Delas 195 is a PVC NBR material,. This product is available in the Asia-Pacific region and is processed by extrusion or injection molding. The main characteristics of Delas 195 are: chemical resistance. The typical application field of Delas 195 is: wire and cable |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.26 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 1.5 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec) | 95 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 16.7 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 290 | % | ASTM D412 |
| Tear Strength | 45.0 | kN/m | ASTM D624 |
| Compression Set (70°C) | 65 | % | ASTM D395 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Operating Temperature | -15 - 80 | °C | ASTM D746 |
| Tear Permanent Deformation | 78 | % | ASTM D412 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80 | °C | |
| Drying Time | 4.0 | hr | |
| Rear Temperature | 140 - 150 | °C | |
| Middle Temperature | 150 - 160 | °C | |
| Front Temperature | 160 - 170 | °C | |
| Nozzle Temperature | 170 - 180 | °C | |
| Mold Temperature | 10 - 50 | °C | |
| Back Pressure | 0.0700 - 1.00 | MPa | |
| Screw Speed | 100 - 200 | rpm |
| Extrusion instructions |
|---|
| Feed Zone: 140 - 150 °CFeed Section : 150 - 160 °CMetering Section: 160 - 170°CFront Temperature: 170 - 180 °CMold Temperature: 170 - 180 °CFilter: 20-60 mesh |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Matrixx 55S5202 | The Matrixx Group, Inc. | PC | Matrixx |
| TITANPRO® PM430 | Lotte Chemical Titan (M) Sdn. Bhd. | PP Homopolymer | TITANPRO® |
| WPP PP PPC3GF1.5-Natural | Washington Penn Plastic Co. Inc. | PP Impact Copolymer | WPP PP |
| OP - PBT 15GF-FR | Oxford Polymers | PBT | OP - PBT |
| TECACOMP® PEEK 450 TF10 blue 3905 | Ensinger GmbH | PEEK | TECACOMP® |
