Order Products : sales@su-jiao.com
Devlon 6GF30
| Category: | TP, Unspecified , Thermoplastic |
| Manufacturer: | Devol® Engineering Polymers |
| Trademark: | Devlon |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | p2mN9q_Devlon-6GF30.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Devlon 6GF30 is a Thermoplastic material filled with 30% glass fiber. It is available in Europe. Primary attribute of Devlon 6GF30: Flame Rated. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.35 | g/cm³ | ASTM D792 |
| Water Absorption | ASTM D570 | ||
| 24 hr | 0.10 | % | |
| Saturation | 1.5 to 2.0 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 118 | ASTM D785 | |
| Durometer Hardness (Shore D) | 84 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 9500 | MPa | ASTM D638 |
| Tensile Strength (23°C) | 180 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 3.0 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 220 | °C | |
| 1.8 MPa, Unannealed | 210 | °C | |
| Melting Temperature | 220 | °C | ASTM D3418 |
| CLTE - Flow (30 to 100°C) | 2.5E-5 | cm/cm/°C | ASTM E831 |
| Service Temperature | ASTM D570 | ||
| -- 1 | -30 to 120 | °C | |
| Short Term | 180 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength | 25 | kV/mm | ASTM D149 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Note Message | |
|---|---|
| 1 . | Long Term |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VALOX™ VIC4311 resin | SABIC Innovative Plastics | PBT | VALOX™ |
| Dryflex® 602850S | ELASTO | SEBS | Dryflex® |
| FRAGOM PR/800 | Crosspolimeri S.p.A. | Polyolefin, Unspecified | FRAGOM |
| FORMULA P ELAN 5210 M2 | Putsch Kunststoffe GmbH | PP, Unspecified | FORMULA P |
| ESTABLEND 8500 VO | Cossa Polimeri S.r.l. | ASA+PC | ESTABLEND |
