Order Products : sales@su-jiao.com
Grilamid® LBV-25H black 9472
| Category: | Nylon 12 , Polyamide 12 |
| Manufacturer: | EMS-GRIVORY |
| Trademark: | Grilamid® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | p2Rieb_GrilamidLBV25Hblack9472.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Grilamid®LBV-25H black 9472 is a polyamide 12 (nylon 12) material, which contains a 25% glass fiber reinforced material. This product is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. The processing method is injection molding. Grilamid®The main characteristics of LBV-25H black 9472 are: flame retardant/rated flame. Typical application areas include:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.19 | -- | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 294-4 | |||
| Transverse flow | 0.50 | -- | % | ISO 294-4 |
| Flow | 0.10 | -- | % | ISO 294-4 |
| Water Absorption | ISO 62 | |||
| Saturated, 23°C | 1.1 | -- | % | ISO 62 |
| Equilibrium, 23°C, 50% RH | 0.60 | -- | % | ISO 62 |
| Hardness | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Durometer Hardness (Shore D, 15 sec) | 82 | 82 | ASTM D2240 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | 6000 | 5800 | MPa | ISO 527-2 |
| Tensile Stress (Break) | 115 | 110 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 3.0 | 3.0 | % | ISO 527-2 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | |||
| -30°C | 9.0 | 8.0 | kJ/m² | ISO 179/1eA |
| 23°C | 15 | 11 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength (23°C) | 75 | 60 | kJ/m² | ISO 179/1eU |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature | ||||
| 1.8 MPa, not annealed | 140 | -- | °C | ISO 75-2/A |
| 8.0 MPa, not annealed | 65.0 | -- | °C | ISO 75-2/C |
| Continuous Use Temperature | ||||
| -- 1 | 90.0 - 110 | -- | °C | ISO 2578 |
| -- 2 | 140 | -- | °C | Internal method |
| Melting Temperature 3 | 178 | -- | °C | ISO 11357-3 |
| Linear thermal expansion coefficient | ISO 11359-2 | |||
| Flow | 3.0E-5 | -- | cm/cm/°C | ISO 11359-2 |
| Lateral | 1.1E-4 | -- | cm/cm/°C | ISO 11359-2 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface Resistivity | -- | 1.0E+12 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+11 | 1.0E+11 | ohms·cm | IEC 60093 |
| Dielectric Strength | 32 | 32 | kV/mm | IEC 60243-1 |
| Comparative Tracking Index | 600 | 600 | V | IEC 60112 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flammability Classification (0.8 mm) | HB | -- | IEC 60695-11-10, -20 |
| Additional Information | Dry | Conditioned | Test Method | |
|---|---|---|---|---|
| ISO Type | PA 12+X, MHR, 18-060, GF25 | -- | ISO 1874 |
| Note Message | |
|---|---|
| 1 . | Long Term |
| 2 . | Short Term |
| 3 . | 10°C/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Marlex® HMN 55180 | Saudi Polymers Company | HDPE | Marlex® |
| TechnoFin 4702 | TechnoCompound GmbH | PP, Unspecified | TechnoFin |
| GAPEX® RPP30EU68HB | Ferro Corporation | PP Copolymer | GAPEX® |
| Sylvin 83003-73 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Sylvin 7844-60 Yellow 4126 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
