Order Products : sales@su-jiao.com
OmniLon™ PAA GR30 HS
| Category: | Nylon, Unspecified , Polyamide |
| Manufacturer: | OMNI Plastics, LLC |
| Trademark: | OmniLon™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | p0ydNc_OmniLon-PAA-GR30-HS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 30% Glass Reinforced, Reduced Moisture Absorption, Heat Stabilized, Polyamide |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.37 | g/cm³ | ASTM D792 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 165 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 4.0 | % | ASTM D638 |
| Flexural Modulus | 8270 | MPa | ASTM D790 |
| Flexural Strength | 262 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 130 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, 3.18 mm | 260 | °C | |
| 1.8 MPa, Unannealed, 3.18 mm | 246 | °C |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (3.18 mm) | HB | Internal Method |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 121 | °C | |
| Drying Time | 4.0 | hr | |
| Suggested Max Moisture | 0.20 | % | |
| Rear Temperature | 318 to 324 | °C | |
| Middle Temperature | 324 to 329 | °C | |
| Front Temperature | 327 to 332 | °C | |
| Nozzle Temperature | 327 to 332 | °C | |
| Processing (Melt) Temp | 329 to 343 | °C | |
| Mold Temperature | 65.6 to 93.3 | °C | |
| Back Pressure | 0.345 to 0.689 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Trademark PS PS820 | Trademark Plastics Corporation | PS (HIPS) | Trademark PS |
| VALOX™ 315 resin | SABIC Innovative Plastics Europe | PBT | VALOX™ |
| Desmopan® DP 1092A | Covestro - PUR | TPU, Unspecified | Desmopan® |
| Ferro PP TPP40AA05NA | Ferro Corporation | PP Homopolymer | Ferro PP |
| HiFill FR® PA6/6 GF33 FR HS L | Techmer Engineered Solutions | Nylon 66 | HiFill FR® |
