Order Products : sales@su-jiao.com

Pristene RM5100

Category:	Polyolefin, Unspecified , Polyolefin
Manufacturer:	PolyMirae
Trademark:	Pristene
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	ozggpQ_Pristene-RM5100.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Pristene RM5100 resin, part of a specialty resins family produced using proprietary single-site catalysts, offers potential solutions for customers. The resin sets new industry standards in high clarity and stiffness, offering opportunities for converters and end users to extend the boundaries of application performance. The use of proprietary single site catalysts to produce the resin translates into products with excellent aesthetics, surface gloss and purity. The high level of purity enables its use in consumer goods. Product Features High clarity and gloss/Good balance of Stiffness and transparency /High level of purity enables its use in consumer goods Typical Applications Sheet& Thermoforming / Blow Molding (EBM, IBM, ISBM) / Film applications

Message

Pristene RM5100 resin, part of a specialty resins family produced using proprietary single-site catalysts, offers potential solutions for customers. The resin sets new industry standards in high clarity and stiffness, offering opportunities for converters and end users to extend the boundaries of application performance. The use of proprietary single site catalysts to produce the resin translates into products with excellent aesthetics, surface gloss and purity. The high level of purity enables its use in consumer goods.

Product Features
High clarity and gloss/Good balance of Stiffness and transparency /High level of purity enables its use in consumer goods

Typical Applications
Sheet& Thermoforming / Blow Molding (EBM, IBM, ISBM) / Film applications

General Information
Features	Clean/High Purity Copolymer Good Dimensional Stability High Clarity High Gloss High Stiffness Pleasing Surface Appearance
Uses	Blow Molding Applications Film Sheet
Appearance	Clear/Transparent
Processing Method	Blow Molding Film Extrusion Sheet Extrusion Thermoforming

Physical	Nominal Value	Unit	Test Method
Density	0.900	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	8.0	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	35.3	MPa	ASTM D638
Flexural Modulus	1370	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C)	29	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed)	100	°C	ASTM D648

Resin Grade	Manufacturer	Category	Trademark
RJM SN501G50AH	RJM International, Inc.	Nylon 6	RJM
tefabloc® TP SD 333 75A	Mitsubishi Chemical Performance Polymers, Inc.	TPE	tefabloc®
EPO-TEK® B9021-1	Epoxy Technology Inc.	Epoxy	EPO-TEK®
Sylvin 7833-70 Natural	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
SABIC® HDPE CC453G	Saudi Basic Industries Corporation (SABIC)	HDPE	SABIC® HDPE