Order Products : sales@su-jiao.com
Braskem PE GD5150K
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Braskem |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | owEL4i_Braskem-PE-GD5150K.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
GD5150K is a High Density Polyethylene, with medium molar mass, specially developed for the manufacturing of insulation for wires and cables demanding high extrusion velocity. It has medium molar mass, shows good dielectric properties and contains special additives to prevent catalytic oxidation of copper. Application: Insulation for wires and cables; multiplex cables. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.946 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.83 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (50°C, 2.00 mm, 100% Igepal, Compression Molded, F50) | 139 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Compression Molded) | 63 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, Compression Molded | 23.0 | MPa | |
| Break, Compression Molded | 28.0 | MPa | |
| Tensile Elongation | ASTM D638 | ||
| Yield, Compression Molded | 11 | % | |
| Break, Compression Molded | 980 | % | |
| Flexural Modulus - 1% Secant (Compression Molded) | 950 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Compression Molded) | 65 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Compression Molded) | 69.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 121 | °C | ASTM D1525 1 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | > 1.0E+15 | ohms·cm | ASTM D257 |
| Dielectric Strength | 40 | kV/mm | ASTM D149 |
| Dielectric Constant (1 kHz) | 2.30 | ASTM D150 | |
| Dissipation Factor (1 kHz) | 6.0E-4 | ASTM D150 |
| Note Message | |
|---|---|
| 1 . | Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RheTech Polypropylene G10P100-01UV | RheTech, Inc. | PP, Unspecified | RheTech Polypropylene |
| Fiberfil® PP-62/CC/20/UV | Fiberfil® Engineered Plastics Inc. | PP Copolymer | Fiberfil® |
| GAPEX® RPP30EB60UL NATURAL | Ferro Corporation | PP Homopolymer | GAPEX® |
| Kepamid® 1325GFS | Korea Engineering Plastics Co., Ltd | Nylon 6 | Kepamid® |
| Diakon® CTG835 | Lucite International Holland BV | Acrylic (PMMA) | Diakon® |
