Order Products : sales@su-jiao.com
Polylink Polymer P-11020-GF
| Category: | TPO , Compounded Polypropylene |
| Manufacturer: | Polylink Polymers (India) Ltd. |
| Trademark: | Polylink Polymer |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | oucXZ0_Polylink-Polymer-P-11020-GF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Filled Polypropylene compounds are manufactured by compounding Polypropylene with fine fillers (i.e. mica, chalk, talc, glass). Additives like antioxidants, lubricant, processing aid and desiccant are added to improve long term thermal and processability. The compounds used directly or diluted with desired grades of polypropylenes show good dispensability and excellent balance of properties in the ultimate product. The fillers in the compound incorporates certain important properties those are essential for ultimate product. The modification are as below. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.05 - 1.10 | g/cm³ | Internal method |
| Moisture Content | < 800 | ppm | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 34.3 - 39.2 | MPa | ASTM D638 |
| Flexural Modulus | 4120 - 4310 | MPa | ASTM D790 |
| Flexural Strength | 49.0 - 63.7 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 64 - 69 | J/m | ASTM D256 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 70.0 | °C | |
| Drying Time | 0.50 | hr | |
| Cylinder Zone 1 Temp. | 190 | °C | |
| Cylinder Zone 2 Temp. | 200 | °C | |
| Cylinder Zone 3 Temp. | 210 | °C | |
| Cylinder Zone 4 Temp. | 215 | °C | |
| Cylinder Zone 5 Temp. | 220 | °C |
| Extrusion instructions |
|---|
| Zone 6 : 230°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TRIBIT® 1500GN40 | Samyang Corporation | PBT | TRIBIT® |
| Unipren® Elastomers B3 PRTA010 70A EG06S1 UP341 | Petropol Industry and Trade of Polymers LTDA | PP+EPDM | Unipren® Elastomers |
| Anjacom® 100V-UV | Almaak International GmbH | PC | Anjacom® |
| Hyundai EP TPO HR930 | HYUNDAI EP Co., Ltd. | TPO (POE) | Hyundai EP TPO |
| HYPERIER® IP1207B | LG Chem Ltd. | TP, Unspecified | HYPERIER® |
