Order Products : sales@su-jiao.com
CEPLA CW-452E
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | CEPLA Co., LTD |
| Trademark: | CEPLA |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ot8DUi_CEPLA-CW-452E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
CEPLA CW-452E is a Polypropylene material filled with filler. It is available in Asia Pacific, Europe, or Latin America. Important attributes of CEPLA CW-452E are:
Typical application of CEPLA CW-452E: Automotive |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.03 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 20 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 19.6 | MPa | ASTM D638 |
| Flexural Modulus | 1860 | MPa | ASTM D790 |
| Flexural Strength | 31.4 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact | ASTM D256 | ||
| -30°C | 39 | J/m | |
| 23°C | 250 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | 110 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEKAFIN™ P730G10 | Mando Advanced Materials Co., Ltd. | PP, Unspecified | TEKAFIN™ |
| THERMORUN® QT80MA | Mitsubishi Chemical Corporation | TPO (POE) | THERMORUN® |
| Veroplas 450 | PlastxWorld Inc. | ABS | Veroplas |
| KEBAFORM® C 904 CF | BARLOG plastics GmbH | Acetal (POM) Copolymer | KEBAFORM® C |
| OTECH PVC OM5830-Soles | OTECH Corporation | PVC, Unspecified | OTECH PVC |
