Order Products : sales@su-jiao.com

EMAC® SA2413

Category:	EMA , Ethylene Methyl Acrylate Copolymer
Manufacturer:	Westlake Chemical Corporation
Trademark:	EMAC®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	osVbGb_EMACSA2413.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Westlake EMAC® SA2413 is an ethylene methyl acrylate copolymer with 16.5% MA designed for blown film. The high slip and antiblock loading in SA2413 provides for easier handling of films and the low C.O.F. needed in many applications. The high compatibility of this resin makes it ideal as an impact modifier and compatibilizer. Application/Uses Medical films Flexible packaging Seal layer Quiet films, batch inclusion films Compatibilizer, impact modifier Key Attributes Good adhesion to or compatibility with various polymers Good heat and RF sealing High slip and antiblock for low C.O.F. Soft, flexible, tough without plasticizers

Message

Westlake EMAC® SA2413 is an ethylene methyl acrylate copolymer with 16.5% MA designed for blown film. The high slip and antiblock loading in SA2413 provides for easier handling of films and the low C.O.F. needed in many applications. The high compatibility of this resin makes it ideal as an impact modifier and compatibilizer.

Application/Uses

Medical films

Flexible packaging

Seal layer

Quiet films, batch inclusion films

Compatibilizer, impact modifier

Key Attributes

Good adhesion to or compatibility with various polymers

Good heat and RF sealing

High slip and antiblock for low C.O.F.

Soft, flexible, tough without plasticizers

General Information
Additive	High smoothness High caking resistance
Features	Low friction coefficient High smoothness High caking resistance Good adhesion Soft
Uses	Blown Film Packaging Films Plastic modification Medical/nursing supplies
Agency Ratings	FDA not rated

Physical	Nominal Value	Unit	Test Method
Density	0.940	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	0.60	g/10 min	ASTM D1238
Methyl Acrylate Content	16.5	wt%

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	40		ASTM D2240

Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature	< -72.8	°C	ASTM D746
Vicat Softening Temperature	62.8	°C	ASTM D1525
Peak Melting Temperature	88.9	°C	ASTM D3418

Resin Grade	Manufacturer	Category	Trademark
RheTech Thermoplastic Polyolefin FT2600-677UV	RheTech, Inc.	Polyolefin, Unspecified	RheTech Thermoplastic Polyolefin
Thermec™ 4150RMC65	Technical Polymers, LLC	PPS	Thermec™
ASI POLYPROPYLENE 1329	A. Schulman Inc.	PP Copolymer	ASI POLYPROPYLENE
CERTENE™ HWB-0150	Muehlstein	HDPE, EHMW	CERTENE™
Geon™ Vinyl Rigid Extrusion L6180	PolyOne Corporation	PVC, Rigid	Geon™ Vinyl Rigid Extrusion