Order Products : sales@su-jiao.com
VECTOR® 4213N
| Category: | SIS+SI , Styrene Isoprene Styrene + SI Block Copolymer |
| Manufacturer: | TSRC Corporation |
| Trademark: | VECTOR® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | or3IxL_VECTOR-4213N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
VECTOR 4213A and VECTOR 4213N styrenic block copolymers are blended products composed of a linear SIS triblock copolymer and an SI diblock copolymer. They are well-suited for use in hot melt adhesives for hygiene applications requiring superior cohesive strength and heat resistance along with low creep compliance.
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.938 | g/cm³ | ASTM D792 |
| Apparent Density | 0.33 | g/cm³ | ASTM D1895 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 12 | g/10 min | ASTM D1238 |
| Bound Styrene | 25.0 | % | |
| Ash Content | 0.3 | wt% | |
| Solution Viscosity - in 25 wt% Toluene (25°C) | 370 | mPa·s |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Diblock Content | 25.0 | wt% |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 1 sec, Compression Molded) | 51 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(300% Strain) | 2.90 | MPa | Internal Method |
| Tensile Strength 2(Break) | 15.0 | MPa | Internal Method |
| Tensile Elongation 3(Break) | 1100 | % | Internal Method |
| Note Message | |
|---|---|
| 1 . | Compression Molded |
| 2 . | Compression Molded |
| 3 . | Compression Molded |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Precision Polymer N93B | Precision Polymer Engineering Ltd. | NBR | Precision Polymer |
| SEETEC PP H5300 | LG Chem Ltd. | PP Homopolymer | SEETEC PP |
| Toughblend® PA6-1900 | Colour Image Plastic Compound Sdn. Bhd. (CIPC) | Nylon 6 | Toughblend® |
| DIALAC® TW15G | UMG ABS, Ltd. | SAS | DIALAC® |
| TECHNYL® A 222 NATURAL | Solvay Engineering Plastics | Nylon 66 | TECHNYL® |
