Order Products : sales@su-jiao.com
Elastocon® 8078N
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Elastocon TPE Technologies |
| Trademark: | Elastocon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | oq995y_Elastocon-8078N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Elastocon® 8078N is a colorable thermoplastic elastomer formulated for applications that require rubber-like properties and a good surface finish. Elastocon® 8078N is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8078N can be overmolded to polypropylene. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.01 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 1.5 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 80 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 5.17 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 9.73 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 590 | % | ASTM D412 |
| Compression Set (23°C, 22 hr) | 24 | % | ASTM D395B |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 177 - 193 | °C | |
| Front Temperature | 182 - 199 | °C | |
| Nozzle Temperature | 188 - 204 | °C | |
| Mold Temperature | 21.1 - 37.8 | °C | |
| Injection Rate | Moderate-Fast | ||
| Back Pressure | 0.345 - 0.689 | MPa |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Hopper Temperature | < 79.4 | °C | |
| Cylinder Zone 1 Temp. | 191 - 232 | °C | |
| Cylinder Zone 2 Temp. | 191 - 232 | °C | |
| Cylinder Zone 3 Temp. | 191 - 232 | °C | |
| Cylinder Zone 4 Temp. | 191 - 232 | °C | |
| Cylinder Zone 5 Temp. | 191 - 232 | °C | |
| Die Temperature | 191 - 232 | °C |
| Extrusion instructions |
|---|
| Compression ratio: 2.5 to 3.0 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sipolprene® 72220 | SIPOL S.p.A | TPC-ET | Sipolprene® |
| TEREZ PA 6 7410 GK 30 | TER HELL PLASTIC GMBH | Nylon 6 | TEREZ PA 6 |
| XANTAR® MX 1021 | Mitsubishi Engineering-Plastics Corp | PC | XANTAR® |
| ALFATER XL® A60I 3EF0001 | ALBIS PLASTIC GmbH | TPV | ALFATER XL® |
| Durolon® IR2200 | Unigel Plásticos | PC | Durolon® |
