Order Products : sales@su-jiao.com
Generic ABS+PC - Carbon Fiber
| Category: | PC+ABS , Polycarbonate + ABS |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | opPuXN_Generic-ABS-PC---Carbon-Fiber.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic ABS+PC - Carbon Fiber This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.18 - 1.34 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (23°C) | 0.095 - 0.20 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 6890 - 15300 | MPa | ASTM D638 |
| Tensile Strength (23°C) | 103 - 159 | MPa | ASTM D638 |
| Tensile Elongation | ASTM D638 | ||
| Yield, 23°C | 1.0 - 2.0 | % | ASTM D638 |
| Fracture, 23°C | 1.0 - 3.0 | % | ASTM D638 |
| Flexural Modulus (23°C) | 6210 - 15900 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 152 - 214 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 37 - 110 | J/m | ASTM D256 |
| Unnotched Izod Impact (23°C) | 320 - 530 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 107 - 129 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+2 - 1.0E+6 | ohms | ASTM D257 |
| Volume Resistivity (23°C) | 1.0 - 1.0E+5 | ohms·cm | ASTM D257 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 93.1 - 98.9 | °C | |
| Drying Time | 3.5 - 4.0 | hr | |
| Rear Temperature | 259 - 260 | °C | |
| Middle Temperature | 260 - 261 | °C | |
| Front Temperature | 260 - 261 | °C | |
| Processing (Melt) Temp | 258 - 259 | °C | |
| Mold Temperature | 71.9 - 85.0 | °C | |
| Injection Pressure | 85.9 - 86.4 | MPa |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic ABS+PC - Carbon FiberThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Solef® 9007 | Solvay Specialty Polymers | PVDF | Solef® |
| SolVin 271GA | INOVYN | PVC, Unspecified | SolVin |
| Hostacom PPT X9037HS | LyondellBasell Industries | PP Copolymer | Hostacom |
| Karina WHITE PVC COMPOUND -E820-10/133-Y-ERYB (E-76534) | Karina Ind. e Com. de Plásticos Ltda | PVC, Unspecified | Karina |
| VALOX™ 357U resin | SABIC Innovative Plastics | PC+PBT | VALOX™ |
