Order Products : sales@su-jiao.com
Visico™ LE4423 / Visico™LE4438
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Borealis AG |
| Trademark: | Visico™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ooXHpN_Visico-LE4423-Visico-LE4438.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Visico LE4423 / Visico LE4438 is a silane crosslinkable natural compound designed for low voltage power cables up to 6 kV. Visico LE4423 and Visico LE4438 is a combination of a Visico base material and a catalyst master batch which accelerates the moisture-induced crosslinking reaction. When properly mixed, addition of 5 parts of Visico LE4438 to 95 parts of Visico LE4423 , insulation with excellent thermo-oxidative stability, also in contact with copper as well as aluminium, is achieved. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1 | 0.923 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.0 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance (50°C, 10% Igepal, F20) | > 96.0 | hr | IEC 60811-4-1/B |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D, 1 sec) | 52 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | > 15.0 | MPa | ISO 527-2/250 |
| Tensile Strain (Break) | > 300 | % | ISO 527-2/250 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Mechanical Properties After Aging in Air Oven, 135°C, 240 hr (Change in Tensile Strength) | < 25 | % | IEC 60811 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -76.0 | °C | ASTM D746 |
| Hot Set 2 | IEC 60811-2-1 | ||
| Elongation under load : 200°C | 60 | % | |
| Permanent deformation : 200°C | 0.0 | % |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | > 1.0E+16 | ohms·cm | IEC 60093 |
| Electric Strength | > 22 | kV/mm | IEC 60243-1 |
| Dielectric Constant (50 Hz) | < 2.30 | IEC 60250 | |
| Dissipation Factor (50 Hz) | < 5.0E-4 | IEC 60250 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 150 | °C | |
| Cylinder Zone 2 Temp. | 170 | °C | |
| Cylinder Zone 3 Temp. | 170 | °C | |
| Cylinder Zone 4 Temp. | 170 | °C | |
| Die Temperature | 170 | °C |
| Note Message | |
|---|---|
| 1 . | Mixture 95:5 |
| 2 . | 0.20 MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PTS PCA-2010NH | Polymer Technology and Services, LLC | PC+ABS | PTS |
| REPRO PP RC3X | Rondo Plast AB | PP, Unspecified | REPRO |
| Sarlink® TPV X6135N | Teknor Apex Company | TPV | Sarlink® TPV |
| CALIBRE™ 2060-6 | Trinseo | PC | CALIBRE™ |
| Dynaprene® VE0080A | Nantex Industry Co., Ltd. | TPE | Dynaprene® |
