Order Products : sales@su-jiao.com
Formolene® 4111T
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Formosa Plastics Corporation, U.S.A. |
| Trademark: | Formolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ooGcbF_Formolene-4111T.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Homopolymer for Non-Wovens and Extrusion Coating Formolene® 4111T is a low viscosity, polypropylene homopolymer designed for extrusion coating, and Nonwoven applications. Its unique combination of stabilizers provides excellent gas fading resistance and good processability. Formolene® 4111T meets all requirements of the U. S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food contact. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 35 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, Injection Molded) | 105 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Injection Molded) | 34.5 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield, Injection Molded) | 8.0 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3(Injection Molded) | 1240 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 21 | J/m | ASTM D256 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Propylux® CN-P | Westlake Plastics Company | PP, Unspecified | Propylux® |
| Quadrathane™ ARC-85A | Biomerics, LLC | TPU-PC | Quadrathane™ |
| Piolen® P T40A37 | PiO Kunststoffe GmbH & Co KG | PP Copolymer | Piolen® P |
| POLYCASA® ACRYL G 77 | Polycasa | Acrylic (PMMA) | POLYCASA® ACRYL |
| MAXAMID™ PA66MG40-BK | Pier One Polymers, Inc. | Nylon 66 | MAXAMID™ |
