Order Products : sales@su-jiao.com
Ateva® 2861A
| Category: | EVA , Ethylene Vinyl Acetate Copolymer |
| Manufacturer: | Celanese EVA Performance Polymers |
| Trademark: | Ateva® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ohxQQK_Ateva-2861A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| This resin is commonly used for extrusion coating and coextrusion applications where low temperature sealing, superior heat seal bonding and hot tack characteristics are required. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.949 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 6.0 | g/10 min | ASTM D1238 |
| Vinyl Acetate Content | 28.0 | wt% |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 27 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break) | 14.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 760 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 43.0 | °C | ASTM D1525 |
| Peak Melting Temperature | 71.0 | °C | ASTM D3418 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | < 210 | °C |
| Note Message | |
|---|---|
| 1 . | Type IV, 50 mm/min |
| 2 . | Type IV, 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Polyvel PLA HD-L02 PLA Impact Modifier (Transparent) | Polyvel Inc. | PLA | Polyvel PLA |
| Prime 2500 | Prime PVC® | PVC, Rigid | Prime |
| T-Blend® TPE-F22 | TSRC Corporation | SEBS | T-Blend® |
| UBESTA 3024 GU6L1 | UBE Engineering Plastics, S.A. | Nylon 12 | UBESTA |
| Polifor® 15 CA/40 H-D NATURALE | SO.F.TER. SPA | PP Homopolymer | Polifor® |
