Order Products : sales@su-jiao.com

KPOL-NYLON K-NY6/27R

Category:	Nylon 6 , Polyamide 6
Manufacturer:	KPOL Chem Co.
Trademark:	KPOL-NYLON
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	ognWfh_KPOL-NYLON-K-NY6-27R.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Standard Polyamide 6

Characteristics

Exhibit excellent melt flow properties for filling thin sections and reduced cycle times. It exhibits good set of mechanical properties, strength, stiffness, and toughness as well as excellent heat, chemical and abrasion resistance.

Applications

Polymer of medium viscosity polyamide 6 for the manufacture of compounds Engineering Plastics.

General purpose, Injection Molding and Extrusion/Molding applications.

General Information
Features	General Purpose Good Abrasion Resistance Good Chemical Resistance Good Flow Good Strength Good Toughness High Heat Resistance High Stiffness Medium Viscosity
Processing Method	Extrusion Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.14	g/cm³	ASTM D792
Water Absorption (Equilibrium)	1.2	%	ASTM D570
Relative Viscosity - SAV @ 98% Sulfuric Acid	2.80		ASTM D789

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	76.0	MPa	ASTM D638

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C)	57	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Melting Temperature	220	°C	ASTM D2117

Resin Grade	Manufacturer	Category	Trademark
TOTAL Polypropylene PPH 4070	TOTAL Refining & Chemicals	PP Homopolymer	TOTAL Polypropylene
ADEKA FC-450	Adeka Corporation	PUR-Ether	ADEKA
ALTECH® PA66 A 2060/100 GF60	ALBIS PLASTIC GmbH	Nylon 66	ALTECH® PA66
Evoprene™ GC 5653	AlphaGary	SEBS	Evoprene™ GC
DENILEN B 3010 CB	Vamp Tech	PP, Unspecified	DENILEN