Order Products : sales@su-jiao.com
Braskem PE CP 180R
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Braskem |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ofy2Qm_BraskemPECP180R.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
CP 180R is heterophasic copolymer developed for the injection molding with excellent balance of processability, stiffness and impact resistance. Applications: Injection of large volume and thin walled design parts with excellent balance between stiffness and impact. Compounds. Processing: Injection Molding. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.900 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 80 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (Injection Molded) | 90 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, injection molding | 30.0 | MPa | ASTM D638 |
| Fracture, injection molding | 30.0 | MPa | ASTM D638 |
| Flexural Modulus - 1% Secant (Injection Molded) | 1600 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ASTM D6110 | ||
| -20°C, injection molding | 25.0 | J/m | ASTM D6110 |
| 23°C, injection molding | 45.0 | J/m | ASTM D6110 |
| Notched Izod Impact | ASTM D256 | ||
| -20°C, injection molding | 20 | J/m | ASTM D256 |
| 23°C, injection molding | 40 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Injection Molded) | 125 | °C | ASTM D648 |
| Vicat Softening Temperature | 150 | °C | ASTM D1525 1 |
| Note Message | |
|---|---|
| 1 . | 压 力1 (10N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxxam™ MN-818.S001-8000 | PolyOne Corporation | PP, Unspecified | Maxxam™ |
| SCHULADUR® A3 GF 30 K2224 | A. Schulman Europe | PBT+ASA | SCHULADUR® |
| TOTAL Polypropylene PPC 10712 | TOTAL Refining & Chemicals | PP Impact Copolymer | TOTAL Polypropylene |
| Hanwha Total PP FB72M | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | PP, Unspecified | Hanwha Total PP |
| ESTALENE EN 10 SSC | Cossa Polimeri S.r.l. | Polyolefin, Unspecified | ESTALENE EN |
