Order Products : sales@su-jiao.com
Laprene® 830000808
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | SO.F.TER. SPA |
| Trademark: | Laprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | odGeIq_Laprene-830000808.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Laprene®830000808 is a styrene-ethylene-butylene-styrene block copolymer (SEBS) material,. This product is available in North America, Latin America or Europe. The processing method is: extrusion. Laprene®The main characteristics of the 830000808 are: compliance with REACH standards. Typical application areas include:
|
| General Information | |
|---|---|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.18 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 3 sec) | 66 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Set | 6 | % | ASTM D412 |
| Tensile Stress 1(100% Strain) | 1.70 | MPa | ASTM D412 |
| Tensile Strength 2 | 9.00 | MPa | ASTM D412 |
| Tensile Elongation 3(Break) | 760 | % | ASTM D412 |
| Tear Strength 4 | 31.0 | kN/m | ASTM D624 |
| Compression Set 5(70°C, 22 hr) | 48 | % | ASTM D395B |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 160 | °C | |
| Cylinder Zone 2 Temp. | 170 | °C | |
| Cylinder Zone 3 Temp. | 180 | °C | |
| Die Temperature | 180 | °C |
| Extrusion instructions |
|---|
| Extrusion Head Temperature: 185°C |
| Note Message | |
|---|---|
| 1 . | Mouth die c |
| 2 . | Mouth die c |
| 3 . | Mouth die c |
| 4 . | C mould |
| 5 . | Type 1 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Silopren® LSR 4050 | Momentive Performance Materials Inc. | Silicone Rubber, LSR | Silopren® |
| HiFill® PA6/6 GF25 FR-NR IM BK | Techmer Engineered Solutions | Nylon 66 | HiFill® |
| LubriOne™ AT-000/05T 2S | PolyOne Corporation | Acetal (POM) Copolymer | LubriOne™ |
| INEOS LLDPE LL6808AA | INEOS Olefins & Polymers Europe | LLDPE | INEOS LLDPE |
| LEXAN™ 500R resin | SABIC Innovative Plastics | PC | LEXAN™ |
