Order Products : sales@su-jiao.com
Sumitomo DAP 52-01
| Category: | DAP , Diallyl Phthalate |
| Manufacturer: | Sumitomo Bakelite North America, Inc. |
| Trademark: | Sumitomo DAP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ocBBBz_Sumitomo-DAP-52-01.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 52-01 is a short glass fiber reinforced, non-flame retardant, diallyl ortho-phthalate molding compound, which meets the requirements of ASTM D5948 Type SDG. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.93 | g/cm³ | ASTM D792 |
| Apparent Density | 0.75 | g/cm³ | ASTM D1895 |
| Molding Shrinkage - Flow | 0.20 to 0.40 | % | ASTM D955 |
| Water Absorption - 48 hr (50°C) | 0.25 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 69.0 | MPa | ASTM D638 |
| Flexural Modulus | 11700 | MPa | ASTM D790 |
| Flexural Strength | 110 | MPa | ASTM D790 |
| Compressive Strength | 130 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 32 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 205 | °C | ASTM D648 |
| CLTE - Flow | 2.1E-5 | cm/cm/°C | ASTM E831 |
| Thermal Conductivity | 0.28 | W/m/K | ASTM C518 |
| RTI Elec | 130 | °C | UL 746 |
| RTI Imp | 130 | °C | UL 746 |
| RTI Str | 130 | °C | UL 746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength 1 | 14 | kV/mm | ASTM D149 |
| Dielectric Constant 2 | ASTM D150 | ||
| 1 kHz | 4.00 | ||
| 1 MHz | 3.50 | ||
| Dissipation Factor 3 | ASTM D150 | ||
| 1 kHz | 0.010 | ||
| 1 MHz | 0.016 | ||
| Arc Resistance | 150 | sec | ASTM D495 |
| Comparative Tracking Index | > 600 | V | ASTM D3638 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 26 | % | ASTM D2863 |
| Note Message | |
|---|---|
| 1 . | 60 Hz, Wet |
| 2 . | Wet |
| 3 . | Wet |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tecomid® NAX0 GR60 NL | Eurotec Engineering Plastics | Nylon 66 | Tecomid® |
| KOPLA ABS KSG1010 | KOPLA Co., Ltd. | ABS | KOPLA ABS |
| Hifax TYC 2052P | LyondellBasell Industries | PP Copolymer | Hifax |
| Sylvin 7843-70 Yellow 405 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Starex VT-0826 | LOTTE ADVANCED MATERIALS CO., LTD. | ABS | Starex |
