Order Products : sales@su-jiao.com
Generic Nylon, Unspecified - Carbon Fiber
| Category: | Nylon, Unspecified , Polyamide |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ob9HPV_Generic-Nylon-Unspecified---Carbon-Fiber.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic Nylon, Unspecified - Carbon Fiber This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.22 - 1.39 | g/cm³ | ASTM D792 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus (23°C) | 7580 - 31000 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 193 - 455 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 32 - 96 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 141 - 263 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 78.8 - 79.5 | °C | |
| Drying Time | 4.0 - 4.1 | hr | |
| Mold Temperature | 82.2 - 149 | °C |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic Nylon, Unspecified - Carbon FiberThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Monprene® SP-14077 | Teknor Apex Company | TPE | Monprene® |
| DIALAC® AVR300 | UMG ABS, Ltd. | ASA | DIALAC® |
| Elastron® G G100.A80.N | Elastron USA, Inc. | SEBS | Elastron® G |
| KRYSTALFLEX™ PE500 | Huntsman Corporation | PUR-Eth,aliphat | KRYSTALFLEX™ |
| Rotuba CAB B9024 (20% Plasticizer) | Rotuba Extruders, Inc. | CAB | Rotuba CAB |
