Order Products : sales@su-jiao.com
NYLOY® NG-1207BM
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Nytex Composites Co., Ltd. |
| Trademark: | NYLOY® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | oVdDGY_NYLOYNG1207BM.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| NYLOY®NG-1207BM is a polyamide 6 (nylon 6) material, which contains a 7.0% filler. This product is available in North America or Asia Pacific region. The processing method is injection molding. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.17 | g/cm³ | ASTM D792 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 58.7 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 7.5 | % | ASTM D638 |
| Flexural Modulus | 2840 | MPa | ASTM D790 |
| Flexural Strength | 83.2 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm) | 75 | J/m | ASTM D256 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 110 | °C | |
| Drying Time | 1.0 | hr | |
| Rear Temperature | 260 | °C | |
| Middle Temperature | 270 | °C | |
| Nozzle Temperature | 280 | °C | |
| Mold Temperature | 80 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tenac™ FS410 | Asahi Kasei Chemicals Corporation | Acetal (POM) Homopolymer | Tenac™ |
| Telcar® TL-2519G | Teknor Apex Company | TPE | Telcar® |
| Asaprene™ T-432 | AKelastomers | SBS | Asaprene™ |
| Huafon JF-W-6080 | Huafon Group Co., Ltd. | PUR, Unspecified | Huafon |
| Cellasto® MH24-35 | BASF Polyurethanes GmbH | TPU, Unspecified | Cellasto® |
